RAMe 4100 Encoder is among the most compact, power-efficient, full-featured MPEG2 Encoder with professional quality encoding. By offering a configuration of up to Eight channels in a 1U/19” rack mount unit, operators can provide multiple, feature-rich services utilizing less space than required in a traditional head-end. The encoder supports composite video input and analog audio. The output is IP that meets DVB TS stream standard and IP data standard.

Full specification:

 

KEY FEATURES Up to Eight high-quality Encoding channels in 1U/19’’ rack mounting unit. capable of MPEG-2 encoding of SD video. Analog audio/video inputs MPEG-2 TS/UDP over IP output (FEC). Optional DVB-ASI output. The encoder supports static or dynamic GOP control to improve the efficiency of the encoder and video quality. Ultra-low bit rate encoding Dolby® AC-3, AAC and MPEG1 Layer II encoding, multi-channel passthrough. Feature to adjust the audio volume prior to encoding. Facility to delay the audio when audio input is out of synchronization with a video's visual track. Feature to control picture appearance by adjusting the brightness, contrast and color. Various video filters available to remove noise and improve the video quality. PSI/SI information creation. PCR correction to accurately correct several PCR of the input data. LCD display. Support system software upgrade over Ethernet Easy to use web-based interface simplifies remote management.

VIDEO SPECIFICATION Video Compression : MPEG2 Video Processing : - Horizontal Blur - Inverse Telecine Detection - Fade detection - Scene change Detection - Deblocking - Motion compensated temporal filter (MCTF) - Motion Estimation - Skin Tone Detection - Weighted Prediction Aspect Ratios : 4 x 3 Resolutions : NTSC (720 x 480i29.97) PAL (720 x 576i25) Encoding Bit-Rate : - MPEG2 0.5 to 15 Mbps (4:2:0 CBR) Profiles and Levels : - MPEG2 High & Main Profile, Main Level Chroma : 4:2:0 & 4:2:2

AUDIO SPECIFICATION RAMe-4188 : 8 video channels, 1 stereo audio per channel RAMe-4148 : 4 video channels, 2 stereo audio per channel RAMe-4128 : 2 video channels, 4 stereo audio per channel RAMe-4118 : 1 video channels, 8 stereo audio per channel	ORDERING INFORMATION RAMe-4188 : 8 video channels, 1 stereo audio per channel RAMe-4148 : 4 video channels, 2 stereo audio per channel RAMe-4128 : 2 video channels, 4 stereo audio per channel RAMe-4118 : 1 video channels, 8 stereo audio per channel	ENVIRONMENTAL Cooling : air flow front to side Operating Temp : Range 0º to 40º C (32º to 122º F) Storage Temp : Range -20º to +80º C ( -4º to +176º F) Operating Humidity : < 95% non-condensing
INPUTS AND OUTPUTS Video Inputs : Analog composite PAL or NTSC Audio Inputs : Analog Unbalanced Outputs : IP (100 BaseT connectors)	POWER Input Voltage Range : 96-263 VAC Line Frequency : 47-63 Hz Typical Consumption : 74 W (8 Channels)	PHYSICAL W x H x D : 48.26 cm x 4.45 cm x 60.69 cm 19" x 1.75" x 24" Weight : 24 lbs. / 11 kg
SYSTEM MANAGEMENT Web Interface

RAMe SD Encoder is among the most compact, power-efficient, full-featured MPEG2 & AVC/H.264 Encoder with broadcast professional quality encoding. Its greatest feature is support of multiple codec either MPEG-2 or AVC/H.264 within the same unit simultaneously. By offering a configuration of up to eight channels in a 1U/19” rack mount unit, operators can provide multiple, feature-rich services utilizing less space than required in a traditional head-end.

The encoder supports PAL or NTSC video input and audio signal can be analog audio. The output can be MPEG IP that meets DVB TS stream standard and IP data standard. The product is ideal for a broad range of applications including contribution and distribution.

Full specification:

 

KEY FEATURES Up to Eight high-quality Encoding channels in 1U/19’’ rack mounting unit. Multi-codec support: capable of MPEG-2 and AVC/H.264 encoding of SD video. MPEG-2 TS/UDP over IP output (FEC). Optional DVB-ASI output. The encoder supports static or dynamic GOP control to improve the efficiency of the encoder and video quality. Ultra-low bit rate encoding Dolby® AC-3, AAC and MPEG1 Layer II encoding, multi-channel passthrough. Feature to adjust the audio volume prior to encoding. Facility to delay the audio when audio input is out of synchronization with a video's visual track. Feature to control picture appearance by adjusting the brightness, contrast and color. Various video filters available to remove noise and improve the video quality. PSI/SI information creation. PCR correction to accurately correct several PCR of the input data. LCD display. Support system software upgrade over Ethernet Easy to use web-based interface simplifies remote management.

VIDEO SPECIFICATION Video Compression : MPEG2 Video Processing : - Horizontal Blur - Inverse Telecine Detection - Fade detection - Scene change Detection - Deblocking - Motion compensated temporal filter (MCTF) - Motion Estimation - Skin Tone Detection - Weighted Prediction Aspect Ratios : 4 x 3 Resolutions : NTSC (720 x 480i29.97) PAL (720 x 576i25) Encoding Bit-Rate : - MPEG2 0.5 to 15 Mbps (4:2:0 CBR) Profiles and Levels : - MPEG2 High & Main Profile, Main Level Chroma : 4:2:0 & 4:2:2

AUDIO SPECIFICATION Audio Formats : MPEG Layer II, Dolby Digital (AC-3), AAC,AC-3 pass-through Operating Modes : Mono, Dual channel*, Stereo, Joint stereo Encoding Bit-Rate : MPEG Audio Layer II: 56 to 384 kbps Dolby Digital (AC-3): 56 to 448 kbpsAAC: 32 to 384 kbps Sampling Frequencies : 32 kHz, 44.1 kHz, 48 kHz	ORDERING INFORMATION RAMe-5288 : 8 video channels, 1 stereo audio per channel RAMe-5248 : 4 video channels, 2 stereo audio per channel RAMe-5228 : 2 video channels, 4 stereo audio per channel RAMe-5218 : 1 video channels, 8 stereo audio per channel	ENVIRONMENTAL Cooling : air flow front to side Operating Temp : Range 0º to 40º C (32º to 122º F) Storage Temp : Range -20º to +80º C ( -4º to +176º F) Operating Humidity : < 95% non-condensing
INPUTS AND OUTPUTS Video Inputs : Analog composite PAL or NTSC Audio Inputs : Analog Unbalanced Outputs : IP (100 BaseT connectors)	POWER Input Voltage Range : 100-240 VAC Line Frequency : 50-60 Hz Typical Consumption : 74 W (8 Channels)	PHYSICAL W x H x D : 48.26 cm x 4.45 cm x 60.69 cm 19" x 1.75" x 24" Weight : 24 lbs. / 11 kg
SYSTEM MANAGEMENT Port : Ethernet Port (10/100BaseT) Protocols : HTTPS, SSH, Telnet Configuration : Web Interface

RAMe HD is a power-efficient, full-featured MPEG2 and AVC/H.264 SD/HD Encoder with broadcast professional quality encoding. It supports MPEG-2 or H.264 compression. RAMe HD has various input and output interfaces. The video input can be from SDI or HDMI while the audio input can be embedded audio, AES EBU or via HDMI interface. The encoder provides IP as well as the DVB ASI output that meets DVB TS stream standard. The product is ideal for a broad range of applications including contribution and distribution.

Full specification:

 

KEY FEATURES Multi-codec support: capable of MPEG-2 or AVC/H.264 encoding of SD / HD video Advanced MPEG-4 AVC HP@L4 video compression CBR, VBR and capped-VBR bit rate control. Real-time Transport Protocol (RTP) and User Datagram Protocol (UDP) support Multicast and Unicast support Time to Live (TTL) support. DVB-ASI output Supports multiple HD formats including 1080i, 1080PsF24 and 720p I, IP and IPB encoding with configurable GOP structure and selectable open/closed GOP. Built-in power trip feature to protect the encoder from power surge. Pass-through of MPEG-1 Layer II and AAC-LC encoded audio (Mono, Stereo and 5.1 channels). Scale-down from HD or SD to low resolution video to support 1Seg video signals for broadcast to mobile devices in resolutions as specified by the ISDB-T, DVB-H and ATSC-M/H standards Feature to adjust the audio volume prior to encoding. Facility to delay the audio when audio input is out of synchronization with a video's visual track. Various video filters available to remove noise and improve the video quality PSI/SI information creation PCR correction to accurately correct several PCR of the input data. SNMP v2 Support LCD display

VIDEO SPECIFICATION Video Compression : MPEG2 Video Processing : - Horizontal Blur - Inverse Telecine Detection - Fade detection - Scene change Detection - Deblocking - Motion compensated temporal filter (MCTF) - Motion Estimation - Skin Tone Detection - Weighted Prediction Resolutions (HD) : 1920x1080 at 60i, 59.94i, 50i, 30p, 29.97p, 25p, 24p, 23.97p4 1280x720 at 60p, 59.94p, 50p. Resolutions (SD) : 720x480 at 59.94i,60i 720x576 at 50i Encoding Bit-Rate : 100 Kbps to 20 Mbps Profiles and Levels : H.264 Baseline, Main, High Up to L4.1 MPEG2 High & Main Profile, Main Level

AUDIO SPECIFICATION Audio Formats : MPEG Layer II, Dolby Digital (AC-3), AAC,AC-3 pass-through Operating Modes : Mono, Dual channel*, Stereo, Joint stereo Encoding Bit-Rate : MPEG Audio Layer II: 56 to 384 kbps Dolby Digital (AC-3): 56 to 448 kbpsAAC: 32 to 384 kbps Sampling Frequencies : 32 kHz, 44.1 kHz, 48 kHz	ORDERING INFORMATION RAMe-7012	ENVIRONMENTAL Cooling : air flow front to side Operating Temp : Range 0º to 40º C (32º to 122º F) Storage Temp : Range -20º to +80º C ( -4º to +176º F) Operating Humidity : < 95% non-condensing
INPUTS AND OUTPUTS Video Inputs : Analog composite PAL or NTSC Audio Inputs : Analog Unbalanced Outputs : IP (100 BaseT connectors) Streaming : RTP/UDP, unicast or multicast Configurable packet size	POWER Input Voltage Range : 100-240 VAC Line Frequency : 50-60 Hz Typical Consumption : 74 W (8 Channels)	PHYSICAL W x H x D : 48.26 cm x 4.45 cm x 60.69 cm 19" x 1.75" x 24" Weight : 24 lbs. / 11 kg
SYSTEM MANAGEMENT Port : Ethernet Port (10/100BaseT) Protocols : HTTPS, SSH, Telnet Configuration : Web Interface